Open Automatic Vacuum Suction Machine

Precautions for open automatic vacuum suction machine:

1. The vacuum suction machine should be placed in a ventilated position to ensure that the motor heat is dissipated and its life is prolonged.

The

2. Lubricate the bearing regularly to ensure lubrication between the bearings.

The

3, regular inspection tool screws, the new vacuum suction machine after use for 1 hour, with a tool to fasten the knife, set the knife's screw, to strengthen the blade and knife holder between the fixed. 

4, in order to ensure the sharpness of the tool incision, should always check the tool to ensure its sharpness, reduce 

5, when the tool is changed, the gap between the movable knife and the fixed knife. The thinner the reclaimed material, the clearance can be adjusted properly.

The

6. Before the second start, you should remove the remaining scrap from the engine room to reduce the starting resistance. 

7. The inertial hood and pulley cover should be opened regularly to remove the ash outlet below the flange, because the vacuum suction machine chamber discharges the powder into the bearing.