Flip Type Color Mixing Machine

ST barrel color mixing machine features:

1. The whole machine base, with a solid structure and stable operation, is made of stainless steel and has good corrosion resistance.

2. The transmission mechanism adopts worm gear and worm direct drive. When used, there is no loud noise, and there is enough oil storage capacity to get a good lubrication.

3. Digital control, shutdown alarm, motor phase loss, over-current protection and other functions

4. All stainless steel shaft and "S" blade, mixing quickly, evenly, with low gong tone, compact structure, easy maintenance

5. Cycloid pin gear reducer, long life, low noise, dry mixing and mixing into one, turn off the "heat switch" can be used for material mixing

Structure diagram

ST barrel mixing machine notes:

1. The air-running test machine requires one-by-one tests, and it can be put into production only if abnormal sounds, high temperature of bearing gears, and temperature rise of the reducer are not found.

2. The shaft seals at both ends of the mixing paddle should be kept clean so as not to cause blackening and deterioration of the material. There are square holes at the outer ends of the mixing tank. The openings should be smooth, and should not be blocked so as to prevent counter pressure and allow dirt to infiltrate. Axis, blackening and deteriorating the material in the tank 

Technical Parameters