Dry Mixing Machine

Dry Mixing Machine

Product Details Plastic drying mixer, with high-speed operation blade, make the plastic particles (or powder resin) heat up with high speed of roll, collision, friction,and the material is in the color mixing process while moisture evaporates rapidly, and achieve the purpose of drying, the...
Product description

Product Details

Plastic drying mixer, with high-speed operation blade, make the plastic particles (or powder resin) heat up with high speed of roll, collision, friction,and the material is in the color mixing process while moisture evaporates rapidly, and achieve the purpose of drying, the result is satisfactory. 

Technical Parameters 

Model

(kw)Power

(HP)Power

(kg)Capacity

(V)Voltage

(r/min)Rotating   speed

(mm)LxWxH   Dimension

(kg)NetWeight

ST-100A

2.2

3

100

380 3φ

63

1100*850*1300

285

ST-150A

4

5.5

150

380 3φ

63

1400*850*1300

358

ST-200A

4

5.5

200

380 3φ

63

1580*1000*1400

530

ST-300A

5.5

7.5

300

380 3φ

63

1950*1000*1400

600

ST-500A

7.5

10

500

380 3φ

63

2120*1050*1580

850 

ST Dry Mixer Performance:

1. The proportion of different plastic granulated powder is different, and the mixing drum has a certain capacity, so when stirring and mixing different plastic powders, the stirring amount may be different.

2. The dry powder mixer requires that all the materials involved in the mixing be evenly distributed. The degree of mixing is divided into three types: ideal mixing, random mixing and complete mixing

3. The degree of mixing of various materials in the mixing machine depends on the proportion of the material to be mixed, the physical state and characteristics, and the type of mixing machine used and the duration of the mixing operation.

Structure description of ST drying blender:

1. The reducer is the main transmission structure of the mixer. It is located on the right side of the machine. During operation, the motor inside the base unit is driven by a V-belt drive worm and a worm gear to drive the mixer at a deceleration of 1:40. The worm gear shaft is hollow and equipped with a fixed key, which enables the mixing paddle to be assembled and disassembled freely. Two ring screws are installed on the top of the reducer for assembly, disassembly and installation. The end cap is equipped with a screw for high-speed stirring paddle positioning, has been adjusted at the factory, generally do not have to adjust in use.

2. The machine slot is a U-shaped body made of stainless steel, equipped with stirring blades, a speed reducer for a horizontal baking mixer, and a material-reducing speed reducer.

3. The material-reducing speed reducer is used to control the positioning angle of the mixing tank. It is located on the right side of the bake-drying mixer. During operation, the motor in the base unit drives the mixing tank to rotate in a certain angle range through the V-belt drive worm and the worm wheel. , Discharging materials at one time

4. The mixer is an integral structure. The motor is mounted on the movable plates on both sides of the machine base. The upper and lower screws of the motor can be adjusted to make the V-belts get a certain degree of tightness and maintain the transmission force.

5. The control box of the mixer is to control the movement of the machine. It is located in front of the right side. The drive of the machine can be used to “push” the “up” and “down” buttons of the large plastic horizontal bake agitator tank.


Hot Tags: dry mixing machine, China, manufacturers, suppliers, factory
Related Products
Feedback

Copyright © Ningbo Rainbow Control Technology Co.,Ltd All Rights Reserved.Tel: +86-574-89057103